Satelitski Kljucevi

As you know, now Oscam Emu supports opening of PowerVu channels in Enigma2 through "Stream Relay method". Everything happens inside the STB, no PC required. Enigma2

streams to oscam-emu, and oscam-emu streams back to Enigma2. You can watch on Enigma2 directly. You can add the stream URL to your channel list, and directly watch on the E2. So here is the complete method for watching these channels on Spark Receivers (Enigma2).
Thanks to “joeuser” for providing oscam binary and config files.

Target Recivers: All receivers with STi7111 & 7162 chips (Amiko SHD-8900 Alien, Amiko Alien2, Startrack 2020 HD )
Recommended Images: OpenATV 5, OpenSpa 4, OpenPli based Images.

File Link:

https://www.mediafire.com/?37efncs90iwevgt

How to:
Download package from the given link and copy oscam file “oscam-1.20-unstable_svn10888-sh4-linux” and oscam configuration files present inside the “config” folder to the your Enigma2 image at the file paths given below:

File Paths:
oscam: /usr/bin
oscam config files: /etc/tuxbox/config

Important:
In case it does not work then replace your “pti.ko” with the provided “pti.ko” file (don’t forget to keep backup of original “pti.ko” file).
“pti.ko” path: /lib/modules/

Channel Configuration:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
http://stb:8001/1:0:19:1234:3EF:1:C00000:0:0:0:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
http://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0:
5. For channel list you must use DreamboxEdit (Dreamset not work) and Service ID must be in Decimal (not in HEX).

Adding the new stream link to your channel list with DreamBoxEdit:
1. Go to the list in the middle "Bouquet details".
2. Right click on a channel, select "IPTV and other streaming services", select "Add".
3. Select "DVB/TS".
4. Choose a name and use the new stream link as URL.
5. Use the "Service ID" of the original channel. You can find it in the left list ("Services").
6. Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link. Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
7. Set Service Type to "1", and enter the correct Service ID for the channel.

Note:
• For best performance, the "Include ECM in http streams" setting must be enabled. If your image supports it (openpli, openatv), you can find it here: OpenWebif

-> Settings -> Customize
• If the setting is not available, you may need to adjust the "ECM fix delay" setting in oscam webif (Config -> Stream Relay). Increase/Lower it until there is no stuttering.

Keys:
Keys are put into SoftCam.kiy, which is placed inside the same folder oscam.conf is (for example /etc/tuxbox/config).
A sample SoftCam.kiy file is provided in package with Asiasat 7 (105.5 East) keys.
kiy format in SoftCam.kiy:
P <srvid> <nb> <kiy>
Example:
P 1234 01 11223344556677
Important:
For keys Service ID (SID) must be in hex format. If Service ID start with 0, delete it and write it at end of Service ID (for 0A28 put A280, for 1234 put 2341, for 5678 put 6785).

Da li trebam ubaciti software u Alien?

U Alien se ne mora ubaciti software.
Po izlasku novog software-a na internet isti će se automatski downloadati na vaš prijemnik (uz vašu potvrdu).
Nije potreban nikakav Extra software da bi ostvarili dodatne mogućnosti prijemnika.
Sve dodatne mogućnosti se ostvaruju putem Plugin-ova.

Kako da ručno instaliram Software-a u Alien? (kada prijemnik nije na internetu)

Za najbolje perfomanse vašeg Amiko SHD-8900 Alien prijemnika preporučujemo Spark software,
osim Spark-a Alien može raditi i na Enigmi 2.

Software je najlakše ubaciti putem USB-a, kad downloadujete software isti snimite na USB a zatim USB stavite pozadi u prijemnik.
Upalite prijemnik i pritisnite MENU>SYSTEM>UPGRADE>UPGRADE FROM USB,
izaberite App+Database,
pod opcijom Folder nađite Software (koji mora biti smješten u Folder npr. Amiko)
počnite sa instalacijom pritiskom na CRVENO dugme po završetku instalacije ići na opciju vrati na fabričke postavke "Reset to factory default".

Kako da instaliram Plugin?

Snimiti Plugin na USB.
USB umetnuti u risiver, pojaviće se menu sa pitanjem da li želite instalirati Plugin, s
amo potvrdite i Plugin će se instalirati
(Folder Plugin morate predhodno kreirati na root-u USB-a i u njega kopirati plugine).

Kako da uradim Firmeware-Upgrade?

Ažuriranje se može uradiri na dva načina:
1) Onlien preko menia Online > Update
2)Skinuti Software/Firmware i Upgrade via USB

Upustvo: Upgrade via USB
Napomena: Ova Meni stavka je dostupna samo ako je prikopčan USB stick i prepoznat od Boxa.
Inače, ova meni stavka nije dostupna...

Koristite dugme OK ili tastere sa strelicama levo/desno za odabir, tastere sa strelicama gore/dole
za navigacijui dugme EXIT za izlazak iz menia



Upgrade Typ: Ovde možete da definisati koji deo Softwarea Boxa će biti update-ovan( lista kanala,
Software i lista kanala ili samo Software)

Folder/na slici Ordner:Ovde izaberite putanju na USbu gde je file (Version.xml) za update. Za navigaciju
koristite tastere sa strelicom gore/dole da biste izabrali putanju i Ok dugme da biste odabrali Folder.
Da bi ostavke bile prihvaćene pritisnite crveno dugme...

Pritisnite crveno dugme da bi ste zapoceli upgrade(nadogradnja) proces.
Ovaj proces može potrajati neko vreme.
Nemoj te isključivati Box-Box će se sam restartovati ako je to potrebno.

UPOMOĆ! Moj Spark-System neće da se pokrene? Šta sada?

Bez panike, u većini slučajeva može da pomogne RescueImage.

Rescue-Image za Amiko Alien(SPARK) (Sti7111)
Koristiti ako nemome neće više da se pokrene Spark
Preporučuje se i kod problema nepoznate prirode...

Upustvo:
-Skinite/download i raspakujte Rescue Image
-Folder "spark" sa sadržajem( "mImage" i "userfsub.img") prebaciti na Fat32 formatiran USB stick
-Stick ubaciti kada je Box isklkjučen
-Pri uključivanju Boxa držati stisnuto dugme "OK" sve dok se ne pojavi "FORC" na ekranu
-Pritisnuti dugme "^" i pojavi se "SPAR" na ekranu
-Sada pritisnuti dugme ">", pojavi se "FACT" na ekranu i potvrditi sa "OK"
-Box sad instalira Rescue Image( prepozna je se po svetlecem "U LD" i po završetu se sam restartuje

Nakon toga je Spark-deo Flasha u potunosti nanovo Flashovan, Box je kvazi u fabričkom "nevinom" stanju
Zatim se može sasvim normalno ažurirati najnovija verzija softwarea...
Napomena: Kad trepti "7 70" na ekranu zanči da je neki problem...
Moguće greške:
*stick nije prepoznat-->probati neki drugi
*Stick nije formatira za Fat32-->Nanovo ga formatirati
*Putanja foldera nije ispravna ili fajlovi na sticku nisu dobri-->sve prekontolisati

Rescue-Image za Amiko Alien 2 (STi7162)
Upustvo za Flashovanje je isto kao i za Alien1
Napomena: Kad trepti "7 70" na ekranu zanči da je neki problem...
Moguće greške:
*Stick je uštekan napred-->uštekati Stick od pozadi
*stick nije prepoznat-->probati neki drugi
*Stick nije formatira za Fat32-->Nanovo ga formatirati
*Putanja foldera nije ispravna ili fajlovi na sticku nisu dobri-->sve prekontolirati

Kako mogu birati između Sparka i E2?

(OK) držati pritisnuto dok se pojavi (FORC) zatim (V/strelica na dole) i potvrditi sa (OK)-> Botsystem je sad E2
(OK) držati pritisnuto dok se pojavi (FORC) zatim (^/strelica gore) i potvrditi sa (OK)-> Bootsystem je sad SPARK

Koji Plugin je potreban za koristenje kartice u internom slotu?

Naj popularniji
1) MCAS
2) Oscam

Opšte informacije o radu kartice:
*Katricu sa chipom na gore uštekati
*Conax-Reader u Meniu isključiti

Kako da instaliram Spark-Settings u xml formatu?

Prebaciti 5 xml filea na USB-Stick i uštekati u Box
Zatim menu->system->upgrade->database transformer i pritisnuti LOAD

Kako da povežem SPARK box sa PCom preko ftpa?

Prvo treba da podesite IP adresu boxa ili da saznate koja je ako je aktiviran DHCP
Znači pod "Net settings" dobijete prozor sa opcijama za podešavanje lan mreže...
1. DHPC: pritisnite dugme strelicu levo/desno da biste aktivirali ili deaktivirali opciju
2. IP: Ovde ako je isključena opcija DHCP upisujete željenu IP adresu vašeg boxa koja mora da bude u opsegu vase kućne mreže
NPR: 192.168.XXX.YYY  xxx=opseg vase kućne mreže; yyy=jedinstvena adresa, nesme da se poklapa ni sa jednim uređajem koji je u okviru iste mreže
3. Network Mask: upisuje se mask adresa vaše mreže obično je 255.255.255.0
4. Gate Way: tu se obično upisuje IP adresa vašeg rutera ili modema
5. DNS: ovde se upisuje IP adresa koju vam je dao vaš internet provider
6. Mac Address: ovo nemojte da dirate
7, Sad to sve potvrdite sa "OK"

Dalje:
1. Skinuti neki FTP clijent na PC, recimo TotalCommander(TC).
2. Pokrenuti TC
3. Pod opcijom "Net" u gornjoj traci TCa izabrati "FTP Connect.."
4. U novo otvorenom prozoru izabrati opciju "New connection..."
5. Sad u tom prozoru:
-Session: upisati ima kako želite da vam se zove konekcija
-Host name[:Port]: upisati IP adresu vašeg boxa
-User name: root
-Password: root (ako niste menjali lozinku)
6. Potvrditi sa OK
Kad ste sve to odradili u prozoru koji je ostao pojavilo se ime koje ste upisali za konekciju i sad jednostvno kliknete na njega da bi ste se konektovali na box

Uputsvo za povezivanje preko Samba:

Pod originalnim firwaremom standarno radi Samba, tako da je pod windowsom moguć jednostavan mrežni pristup.
Znači Start>RuN> i upisati sledeće



IP adresu boxa naravno upisati pre \STORAGE.

Onda to odprilike izgleda ovako:


\STORAGE\c\ je putanja ka USB-Mediji HDDu ili Sticku zavisno šta je uključeno u box
\STORAGE\c\pvr\ putanja ka folderu/fascikli za snimljene emisije

Kako promeniti Radio i Boot logo?

Željena slika mora da bude u PNG formatu i veličine 1920x1080 .
I onda jednostavno preimenovati u radio.png ili boot.png .

Onda se spojiti na box sa FTP clijentom i u Folderu /root/spark/Logo/ izmeniti/prepisati postojece filove.

Koji HDDovi rade u Alienu?

HDD 2,5" extern (USB-powered)

    Maxell 280 GB usb/sata
    Medion MD 90170, USB 3.0, 2,5'' 500GB
    I-Tec My Safe USB 2.0 Portable Hard Drive
    Samsung G2 Portable 640 GB 2,5"
    SEAGATE 320GB (Speedtest: 127 Mbit/s)
    Seagate Free Agent Go (ST903203FGD2E1-RK) (320 GB, 5400 Udr./min) Speedtest ca. 125 MBit/s, FAT32 immer etwas schneller.
    Tevion Drive n' Go P82721 2,5" 500GB
    Trekstor DataStation 2,5" 320 GB
    WD Elements Portable 250 GB 2,5"
    WD Elements USB 500GB
    WD My Passport Essential 320GB (WDME3200TE)
    WD My Passport Essential 500GB
    WD Scorpio Blue 160GB, USB/SATA (WD1600BEV)

HDD 3,5" (sopstveno napajanje)

    Hitachi LS-1000-EMEA (Simple Drive lll )
    Iomega ScreenPlay HD Multimedia Drive
    Trekstor DataStation maxi m.ub 500GB 3,5" (Speedtest: 160 Mbit/s)
    Samsung HD204UI (2 TB ,5400 Udr./min) Speedtest ca. 145 Mbit/s, FAT32 immer etwas schneller
    Samsung HD103SI (1 TB, 5400 Udr./min.) Speedtest ca. 130 MBit/s, dito
    Samsung HD321HJ (320 GB,7200 Udr./min.) Speedtest ca. 125 MBit/s, dito
    WD Elements 640 GB
    WD Elements WD10000EB035, 1 TB, USB 2.0 (Speedtest: 210 Mbit/s)
    WD Elements Desktop 1 TB, USB 2.0 (WDBAAU0010HBK) (Speedtest: 196 Mbit/s)
    WD Elements 1.5TB, (Speedtest: 120 Mbit/s)

Koji sve 3G USB modemi rade?

Huawei E160G
Huawei E1550
Huawei E1750

Box se zakuca na bootu bez obzira da li je Spark ili E2, šta da radim?

U pricipu ništa strašno, uboot je prso i ako je to teško izvodljivo, ali se pože nanovo instalirati
Upozorenje: samo za korisnike koji poznaju materiju, svi ostali molim vas odnesite box kod profesionalca...

Uputsvo:
Šta je potrebno:
-Nullmodem kabal
-Hyperterminal Program

Upotrebiti samo u slučaju nužde

-Isključiti box, onda ga sa nullmodem kablom preko RS232 spojiti sa PCom
-Pokrenuti HyperTerminal i kreirajte novi link:
>izabrati ispravan Com interface
>Bits per second : 115 200
>Flow control: no

-zatim Transfer> Send File
-izabrati ispravan uboot-xxx.bin
-protocol: Ymodem
-kliknuti send

>sad pokrenuti box
-pri uključenju boxa taster [OK] držati dok se na ekrenu ne pojavi [FORC]
-zatim pritisnuti taster strelicu na levo [<]
-R232 se pjavljuje na Displayu

Sad traje prenos, koji treba da traje oko 2 min.
Upozorenje: Nipošto isključiti box pre vremena ili neki drugi manevar. Flashovati na sopstvenu odgovornost!!!

Kako da instaliram Enigma-image?

Možete sa pluginom e2upgrade pluginom iz sparka
dat je gore u post-u.

USB-Stick treba da se formatira sda FAT32
-Na sticku napraviti folder/fasciklu "enigma2"
-Skinuti neku E2 i raspakovati
-Filove "e2jffs2.img" i "uImage" prebaciti u fasciklu "enigma2"
-Stick ubaciti u isključen box
-pri uključivanju držati taster "OK" dok se na ekranu ne pojavi "FORC"
-sa tasterom strelica na dole "V" ( ili P-) izabrati "ENIG"
-sa tasterom strelica desno ">" (ili V+) potvrditi update sa USBa
-sad počine upload i prepoznajem to šzo na ekranu ispisuje "ULD"
-na kraju dobijemo pruku na ekranu "SUCC" i box se sam restartuje
-posle bi trebalo da se pojavi E2

Kako da se spojim na E2 preko ftp-a?

Postavke za FTP clinet TC su iste kao za Spark.
Stim da morate podesiti IP adresu boxa u mrežnim podešavanjima

Napomena: user name: root ( uvek je root) a password zavisno od imagea( obično piše u readme filovima) a nekima uopšte netreba password
Evo nekih od poznatih Teamova:
HDMU-Images = HDMU (upozorenje: velika slova)
PKT-Images = pkteam
EOS-Images = eos

Kako da istaliram ipk-Pakete?

- Sa DCC E2 v1.50 (Dreambox-Contol-Center)
  On je freeware tako da bez problema možete da ga skinete sa interneta

- Zatim ipk paket možete raspakovati pomoću 7-zip program i ručno instalirati. Tako da obratite pažnju na putanje filova u folderu...

- Ako je u imageu instaliran Explorer, onda se preporučuje sa njim direktno instalirati ipk pakete.
  ipk paket za to jednostavno prebaciti u /tmp imagea i preko explorera ga pronaći

Napomena: Nemojte nikada HDMU-feed ipk pakete instalirati na strane image, jer tako možete spucati image ( HDMU teamu je to jako zabavno). Ali ako ipk pre toga raspakujete možete ga bez straha ručno ubaciti.

Kako da se spojim preko telneta na box?

SA putty ili sa DCC E2 v1.50
I naravno preko windowsa, i to
start>run i tu upisati [ telnet 192.168.xxx.yyy ]=ip vašeg boxa
tražiće pristupne podatke user name i password

Kako da formatiram externi HDD za E2?

HDD formatira u ext3, HDD label zadti ime " RECORD" i napravite folder "movie" na njemu

Kako uvezati HDD sa E2?

Ako neodradi automount na E2 ili neradi HDD install, postoji plugin (hddmanager) koji sve to odraduje bez muke...

Kako da mountujem HDD sa PCa?

Kao prvo na željenom HDD u PCu napraviti neki folder(npr Filmovi) i sharovati...
Na boxu sa Network browserom naći sharovan folder i mountovati ga kao CIFS.
Znači kad browser nađe PC OK pritisnuti ( da bi folder postao vidljiv) i onda opet OK da bi bio mountovan.
Po potrebi unetu u drugi prozor pristune podatke za folder user i pass ( user i pass PCa)...

Ili manuelno mountovati:

Local sharename = Željeno ime
Mount type = CIFS share
Server IP = 192.168.xxx.yyy
Sever share = Filmovi ( ako je to ime foldera koji je sharovan )
use as hdd replacement = yes
Mount options = rw
User name = Username tvog PCa
Password = Pass tvog PCa

Uputstvo za lagani mount/inicijalizaciju HDD ili USB sticka na HDMU Enigmama:

- Povezati se na box putem telneta, user "root", password "HDMU" (password velikim slovima) bez navodnika, naravno.

- USB stick treba da bude ext3 ili fat32, ali HDD treba da ima particiju formatiranu nekim Windows alatom tipa "Easeus partition master" u ext3. Tako kažu, a lično bih probao i sa fat32 varijantom kao kod usb sticka. Lično ne vidim potrebu da mi HDD drlja non-stop, pored jeftinih usb stickova od 16 GB, osim ako zbog snimanja HD materijala (po meni bespotrebno) ne treba uređaj veće brzine i kapaciteta. Za picone, titlove, snimanje SD, crossepg... usb stick je ok.

- Dakle usb je uštekan u box i preko telneta idemo bez navodnika "mkfs.ext3 -L RECORD /dev/sda1" - može copy-paste odavde. Tu komandu odrađuje oko 1 minut za stick od 16GB.

- Sledeća komanda je "cd /autofs/sda1"

- Zatim idemo "mkdir movie"

- Može da se desi (meni nije nikada) da posle ove pretposlednje komande "cd /...", box odgovori nekom greškom. U tom slučaju se pritisne crveno dugme na daljincu, pa opcija "remount" i reset Enigme.

Bez obzira na nejavljanje greške, svaki put sam morao da odradim ovaj poslednji korak (remount i reset), a zatim se posle podizanja enigme ide u menu-setup-system-recording paths.

Tu se ne dira ništa, samo se pritisne zeleno dugme na daljincu "save" i vaš usb je inicijalizovan...

Koristan štos za naše česte reinstalacije Enigme.

Pogotovo za one koji imaju motorizovan sistem, zatim sistem sa više LNB-a itd.

Posle reinstalacije je po meni najgori i najdosadniji deo podešavanje pozicionera, motora, diseqca...

Enigma sve te podatke čuva u fajlu "settings" koji se nalazi u /etc/enigma2/

- Ako se npr. HDMU enigma menja novijom verzijom HDMU (ili starijom), onda je dovoljno sačuvati stari fajl iz podešene enigme i samo ga prekopirati u novoinstaliranu enigmu.

- Ako su enigme različite, npr. HDMU se zamenjuje sa AR-P enigmom, onda otvorite pomoću notepad++ onaj sačuvani fajl i kopirate linije u kojima je pojam "Nims" u fajl u novoj enigmi. Taj novi fajl ste naravno prvo prebacili na računar, tu ga editujete i vratite nazad u box. Te linije se ubacuju na mesto linija sa "Nims" u novom settings fajlu, a tu ih obično ima 0-3 komada. Dakle, vaše sačuvane izgledaju ovako:

config.Nims.0.diseqcMode=single
config.Nims.0.configMode=advanced
config.Nims.0.advanced.sats=450
config.Nims.0.advanced.sat.3592.rotorpo sition=12
config.Nims.0.advanced.sat.3592.usals=false
config.Nims.0.advanced.sat.3592.lnb=1
config.Nims.0.advanced.sat.450.rotorpos ition=66
config.Nims.0.advanced.sat.450.usals=false
config.Nims.0.advanced.sat.450.lnb=1
config.Nims.0.advanced.sat.192.rotorpos ition=4
config.Nims.0.advanced.sat.192.usals=false
config.Nims.0.advanced.sat.192.lnb=1

Važno!!!

U novoinstaliranu enigmu prvo ubacite vašu listu kanala i resetujete enigmu.

Zatim uzmete iz etc/enigma2 settings fajl, editujete ga, overwrite preko istoimenog fajla u navedenoj mapi

Zatim OBAVEZNO gasite box na prekidač, drugačije se ne pamte nove postavke.

Error-Reset E2?

Posto mnogi menjaju skinove pa se desi da ubace neki koji ne "lezi" za vas image i onda se enigma non-stop restartuje evo resenje.

obrisete taj skin koji je problematican ceo njegov folder, koji je u putanji: usr/share/enigma2
zatim udjete u: /etc/enigma2/settings
pronađete liniju koja izgleda ovako: config.skin.primary_skin=xxxxxxxxxxxxxxx/skin.xml
obriši tu liniju i idete na save.

posle toga enigma ce se podici sa default skinom.

Ako cesto mijenjate image u amiku...

Ovako prvi korak je da se skine zeljena enigma za amika 1-edisona, fulana, ili slicne resivere koji su svi isti tako reci samo su imena razlicita...

usb je formatizovan i nalazi se ubacen u box

da bi image mogli da ubacujete a da ne vadite svaki put usb pa u kompjuter i opet u box uradite sledece:

Pokrenete TC ili DCC alat za editovanje i nadjete pod media vas usb u kojem se nalazi vec folder pod nazivom enigma2.

Sledece sto treba da uradite je da izbrisete staru enigmu-image koju imate u tom folderu i preko TC ili DCC ubacite novu enigmu koju ste prethodno skinuli na HD raspakovanu u nekom od foldera vasega komjutera  i samo je zapamtite i to je to.

Sve ostalo vam je poznato odete do boxa ugasite pozadi, zatim upalite i pritisnete ok pa desni taster i sacekate proceduru.

Znaci usb ne nemorate vaditi i opet ubacivati tamo-vamo nego je non stop u boxu.

ovo ne vazi za svaki image znam da vazi za vecinu ..srecno

Kako napraviti backup E2 na Amiko - Alien 1/2

Da odmah naznacim i bez dodatnog fajla bekap ce se izvrsiti ali prijavice da nema fajla
uImage

znaci pre bilo kakvog kopiranja kopirajte uImage sa vase enigme PKT, HDMU i slicno u folder
/boot fajl uImage sa one enigme koju koristite trenutno tj koju ste instalirali tj iz zip ili rar
koji ste download-ovali jer je trenutno nema u /boot a trebace za pravljenje bekap-a.

Znači ove datoteke koje su unutra, treba razbacati po direktorijima, a to ide ovako:

-Fail liblzo2.so2 (ide u /lib/ prava 644) - znaci ne menjati
-Fail mkfs.jffs2 ide u /sbin/    (prava 755)
-U /usr/lib/enigma2/python/Plugins/Extensions/ - ide Flash Backup.
Tu imate jedan fail koji se zove backup.sh (date mu prava 755)

Reboot risivera i spremni ste za pravljenje bekap-a iz same E2 preko ovog plugina

Potom pokrenete plugin i odredite gde da snimi backup primer na USB, i to je to.

Ubacivanje SW i liste u Amiko mini hd se preko USB-a

-formatiraj USB u FAT32
-ubaci na njega sw
-USB skopčaj na Amiko mini hd se
-resiver je prepoznao USB , sada daljinski u ruke:

--menu (ok)

---system (ok)
----software upgrade (ok)

-----upgrade by USB (ok)
-----upgrade file (odabrati sw ili listu)

-----upgrade mode odabrati šta želite ubaciti: samo sw , sw sa bootloaderom , sw sa listom ili samo listu
-------Start (ok)

-sačekati da proces završi i dok izadje poruka da je proces gotov.
-resiver isključite i ponovo uključite i novi sw ili lista je tu.



Ubacivanje CS-a putem daljinskog upravljača

-menu (ok)

--conditional access (ok)
---ip share (ok)
----net client config (ok)
-----odabrati server 1,2,3,4,5,6,7 i kliknuti žutu tipku za edit
-servername (ok) -> žutom tipkom se briše defaultni text
-upisati ime servera (primjer: bosko.buha.cs) - potvrditi sa crvenom tipkom
-server port -> upisati port tog servera (primjer 12345)
-username (ok) -> upisati vaš username (primjer: mirko) - potvrditi sa crvenom tipkom
-password (ok) -> upisati vaš password (primjer: slavko) - potvrditi sa crvenom tipkom
-deskey -> preskoči ovu opciju
-emulator (ok) -> odabrati Cccamd
-activate server- ok
-emm enable - ok
Za gore navedene radnje na kraju izgleda ovako
-pritisnuti crvenu tipku STORE

Sada na net client config treba da pod serverom za koji ste radili edit ispiše da je Server x connect OK , working
Restart možete uraditi ZELENOM tipkom.
U slučaju da se server nije povezao moguće je ili da nemate net na resiveru ,
da je server poslužitelj offline ili ona možda najbitnija da nešto niste ispravno upisali ,
pa se vratite na početak edita i provjerite da li je sve dobro napisano.

1) Copy plugin folder to the root directory of a FAT32 Formatted USB stick

2) Ensure no other USB devices are connected to your receiver

3) Insert the USB stick with your plugin folder into the receiver and after
a few short seconds Spark with prompt you to install/upgrade the plugins.

4) Select yes and the pack will install and then receiver reboot

5) Once the receiver has rebooted you can remove the USB stick (if you do not you will be prompted to install the plugin again until such times as the plugin folder is removed from the USB stick)

HOW TO LOAD SPARK CHANNEL LIST EASY
ON-SCREEN MENU UPDATE USING A USB

THIS METHOD WORKS ON ALL SPARK BASED AMIKO RECEIVERS INCLUDING
THE SHD-8900 ALIEN AND AMIKO ALIEN 2 RECEIVERS

Items required:
USB Stick Formatted to FAT32
–
Use HP Format Tool for formatting if you have any
problems with the USB not being seen by the
Alien / Amiko Alien 2 receiver.

Spark Channel List
This is the channel list you wish to load, exactly which one you use will
depend on what list you have downloaded but all Spark channel lists are made up of several (usually 5 or 6) .xml files.

Step by Step guide
to loading Spark channel list on Amiko SHD-8900 Alien / Alien 2

1)
Download and save your required Spark channel list file for the Amiko
SHD-8900 Alien / Alien 2 to your computer.

2)
Insert a USB stick into your computer, open the channel list file you just downloaded and extract the complete set of .xml files from the .zip or .rar file to the root of the USB stick (which must have been pre-formatted to FAT 32). Usually these files will take such names as radio_fav.xml, radio_prog.xml, sat.xml, tv_fav.xml and tv_prog.xml.

3)
Now remove the USB stick from your computer and with your
Amiko SHD-8900 Alien / Alien 2 receiver powered on and connected to your TV insert the USB stick into a USB port on Amiko SHD-8900 Alien / Alien 2 (either USB port can be used in the case of the Alien 2).

4)
Within a few seconds the Amiko SHD-8900 Alien / Alien 2 receiver will read the USB stick.
After a few seconds using the remote control go to MENU > System > Upgrade > Database
Transformer and make sure the Path is showing a /storage/c/ (providing the .xml files where save to the root of your USB stick) > GREEN (Load).

You should see a pop up on - screen explaining about the import to database and then shortly after a message about saving (these are all automated functions and messages – you don’t need press and keys at this point).

Once the final saving popup message has gone that's it - you can now exit from all the menus and your channels and favourites should be available both under the usual channel list browsing, EPG and FAV buttons.

HOW TO LOAD ENIGMA2 FIRMWARE WITH SPARK PLUGIN
USING A USB STICK AND EASY TO FOLLOW ON-SCREEN
MENU IN SPARK - FOR THE AMIKO ALIEN / ALIEN 2

Items required:
USB Stick Formatted to FAT32 – Use HP Format Tool for
formatting if you have any problems with the USB not being
seen by the Amiko Alien / Alien 2
Spark Mini Plugins pack for the Amiko Alien / Alien 2
Enigma2 Firmware for the Amiko Alien / Alien 2

1)
Download the Amiko Alien / Alien 2 Lavatronics Mini
Plugin Pack and save this file to your computer. The latest
Lavatronics Spark Mini Plugins Pack is available to download
from the Lavatronics Download Centre.

2)
Insert a USB stick into your computer, open the Plugin
Pack file you just downloaded and extract the complete
plugin directory from the .zip or .rar file to the root of the
USB stick (which must have been pre-formatted to FAT 32).

3)
Now remove the USB stick from your computer and with
your Amiko Alien / Alien 2 receiver powered on and
connected to your TV insert the USB stick into a USB port on
Amiko Alien / Alien 2 receiver (either front or rear USB port
will work in the case of the Alien 2 - just ensure you have no
other USB devices connected at the time).

4)
Within a few seconds the Amiko Alien / Alien 2 receiver
will read the USB stick and then automatically prompt you on
screen saying ‘Confirm Do you want to upgrade plug in?’ –
Select YES using the remote control arrow keys and then
press OK on the remote control.

This will now display the ‘Upgrade from USB’ menu and the
update will start automatically which will only take a few
seconds and once complete will automatically reboot your
receiver. At the point of reboot you can now remove the USB
stick from the Amiko Alien / Alien 2 (if you don’t then the
receiver will keep prompting to update after each reboot -
you can just click no though if you wish).

5)
When your Amiko Alien / Alien 2 receiver has finished
booting back up you should now be back to the usual Spark
firmware but there will now has several plugins that have
been installed which can all be found by selecting MENU >
Plug in using the remote control.

At this point you are now half way there, we have all the
tools require to install Enigma2 firmware via Spark so we
just need to get the Enigma2 firmware itself.

6)
Download and save your required Enigma2 firmware for
the Amiko Alien / Alien 2 to your computer.

7)
Insert a USB stick into your computer, open the Enigma2
firmware file you just
downloaded and extract the two files from the .zip or .rar file
to the root of the USB stick (which must have been pre-formatted
to FAT 32). These files will be named uImage and e2jffs2.img.

8)
Now remove the USB stick from your computer and with
your Amiko Alien / Alien 2 receiver powered on and booted
to Spark and connected to your TV insert the USB stick into a
USB port on Amiko Alien / Alien 2 (either front or rear USB
port in the case of the Alien 2).

9)
Within a few seconds the Amiko Alien / Alien 2 receiver
will read the USB stick. After a few seconds using the remote
control go to MENU > Plug in > plugin_e2upgrade.s and
while this is highlighted press the OK button which should
take you straight to the Enigma2 Update menu.

10)
Make sure the Update path is showing as /storage/c/
(providing the two files where save to the root of your USB
stick) and then press RED (Enigma2 Update).
You should see a pop up on-screen explaining about the
updating Enigma2 and warning you not to power off the
receiver (this is all automated functions and messages – you
don’t need press and keys at this point).

After a short while the message will disappear and you will
be returned back to the Enigma2 Update menu – at this point
you are actually finished and Enigma2 is now flashed, so you
can exit all menus and reboot the receiver yourself and using
the FORCE function on boot up make the receiver boot into
Enigma2 mode (by first powering down the receiver and
then powering on the receiver again while pressing and
holding the OK button on the front of the receiver until
FORCE is shown on the front screen, then pressings the
down arrow (Enigma2) on the front of the receiver and then
pressing OK on the front of the receiver)

Your Amiko Alien / Alien 2 is now in Enigma2 mode and so
will boot to this mode each time as default!

If you wish to change this back to Spark as the default it’s
very easy to do, it’s basically using the FORCE function on
boot up make the receiver boot into Spark mode which is
done by pressing and holding the OK button on the front of
the receiver until FORCE is on the front screen, then
pressings the up arrow (Spark) on the front of the receiver
and then pressing OK on the front of the receiver

Here we shall install the Emu’s including CCcam to Spark.

First thing to do is delete all your installed Emu plugins.
Click Menu -> Plugin and click the Green button to delete each one.
On new firmware you will also need to enter the Password: 0 0 0 0

Now you will need to downloademu_plugin.zip the emu_plugin file [ emu_plugin.zip ] Once you have downloaded and unzipped the emu_plugin.zip
Place the folder ‘plugin’ onto a USB stick [Formatted in FAT32] and insert the USB stick into the USB port on the rear of the receiver.

You will then see a popup window, click Yes to install

Now open DCC, [Cick Here] When setting up the Configuration use the following logon data:

Username: root
Password: root

Once a connection has been established, click FTP
Now click var -> /root/plugin/var

Now click on Keys

Now select on your CCcam.cfg file and click on the transfer button

When asked to overwrite click Yes

You can check the CCcam.cfg file is correct, by clicking on it and then click View
If you need to edit the file you can do so by clicking the Edit option.

Once your happy the CCcam.cfg file is okay, you can close DCC.

Now click Menu -> Plugin

Select CCcam214 and click the Enter button, this will start the emu.
You will see it has been started as the Red Off icon will change to Green.

Now you have started the CCcam Emu, you can exit.

Now let us check all is working correctly,
Select an encrypted channel you know your cline will open,
for this example we shall select Calle 13

Once selected click Enter to view the channel.
If you followed the above correctly, you should now get access to the channel.

This file contains the following Emu's:
CCcam
Mgcam
Oscam
Mcas

Cam plugin for Amiko Spark
Amiko Alien SHD 8900 HD - How to add CCcam and clines in Spark

Here we shall install the Emu's including CCcam to Spark.

First thing to do is delete all your installed Emu plugins.
Click Menu -> Plugin and click the Green button to delete each one.

Now you will need to download the emu_plugin file
Once you have downloaded and unzipped the emu_plugin.zip
Place the folder 'plugin' onto a USB stick and insert the USB stick into the USB port on the rear of the receiver.

You will then see a following popup window, click Yes to install

Now open DCC,dowload it from tool in drembox section
When setting up the Configuration use the following logon data:

Username: root
Password: root

Once a connection has been etabslished, click FTP
Now click var -> /root/plugin/var

Now click on Keys

Now select on your CCcam.cfg file and click on the transfer button, boxed in Red below.(or right klick on it when opened copy C:Line and past there and save it)

When asked to overwrite click Yes

You can check the CCcam.cfg file is correct, by clicking on it and then click View
If you need to edit the file you can do so by clicking the Edit option.

Once your happy the CCcam.cfg file is okay, you can close DCC.

Now click Menu -> Plugin

Select CCcam214 and click the Enter button, this will start the emu.
You will see it has been started as the Red Off icon will change to Green.

Now you have started the CCcam Emu, you can exit.

Now let us check all is working correctly,
Select an encrypted channel you know your cline will open,
for this example we shall select Calle 13

Once selected click Enter to view the channel.
If you followed the above correctly, you should now get access to the channel.

1. format cccam line

cccamd~name-dns-server~port(12000)~usser name~pasword

2.Send file to your USB

3.Insert USB into your rec

4.Press Menu>Go to internet >net cofiguration

5.Press c/hsdata.cfg

6.Is apearing a info which ask you if you agree to read this data form from USB

7.Press ok

8.Reboot your AMIKO........

How to add clines and run cccam in Enigma II

First Run DCC and when a connection is made, select FTP Mode.
Now select var and click OK.

Now click Keys

Now select/highlight your CCcam.cfg file and click the transfer button.

When asked to Overwrite click Yes
Once the file has been transfered you may close DCC.

Click the Blue button on the remote and select AR-Panel

Now click Emu Start

And using the < > arrow keys, select CCcam.
Now click the Green button to start CCcam.

Once CCcam has started you can exit the Menu.

If you have problems, re-upload the CCcam.cfg file to var/keys and set the attributes to 644

Here we shall install the Emu's including CCcam to Spark.
First thing to do is delete all your installed Emu plugins.
Click Menu -> Plugin and click the Green button to delete each one.
Now you will need to download the emu_plugin file
Once you have downloaded and unzipped the emu_plugin.zip
Place the folder 'plugin' onto a USB stick and insert the USB stick into the USB port on the rear of the receiver.

You will then see the following popup window, click Yes to install
Now open DCC, I still use version 2.80,

When setting up the Configuration use the following logon data:
Username: root
Password: root

Once a connection has been established, click FTP
Now click var -> /root/plugin/var

Now click on Keys
Now select on your CCcam.cfg file and click on the transfer button, boxed in Red below.

When asked to overwrite click Yes
You can check the CCcam.cfg file is correct, by clicking on it and then click View
If you need to edit the file you can do so by clicking the Edit option.

Once your happy the CCcam.cfg file is okay, you can close DCC.
Now click Menu -> Plugin
Select CCcam214 and click the Enter button, this will start the emu.
You will see it has been started as the Red Off icon will change to Green.

Now you have started the CCcam Emu, you can exit.
Now let us check all is working correctly,
Select an encrypted channel you know your cline will open,
for this example we shall select Calle 13

Once selected click Enter to view the channel.
If you followed the above correctly, you should now get access to the channel.

Here we shall install the Emu’s including CCcam to amiko alien and spark family.

First thing to do is delete all your installed Emu plugins.
Click Menu -> Plugin and click the Green button to delete each one.
Now you will need to download the emu_plugin file
Once you have downloaded and unzipped the emu_plugin.zip
Place the folder ‘plugin’ onto a USB stick and insert the USB stick into the USB port on the rear of the receiver.
You will then see the following popup window, click Yes to install
Now open DCC, I still use version 2.80,
When setting up the Configuration use the following logon data:
Username: root
Password: root
Once a connection has been established, click FTP
Now click var -> /root/plugin/var
Now click on Keys
Now select on your CCcam.cfg file and click on the transfer button, boxed in Red below.
When asked to overwrite click Yes
You can check the CCcam.cfg file is correct, by clicking on it and then click View
If you need to edit the file you can do so by clicking the Edit option.

Once your happy the CCcam.cfg file is okay, you can close DCC.
Now click Menu -> Plugin
Select CCcam214 and click the Enter button, this will start the emu.
You will see it has been started as the Red Off icon will change to Green.

Now you have started the CCcam Emu, you can exit.
Now let us check all is working correctly,
Select an encrypted channel you know your cline will open,
for this example we shall select Calle 13
Once selected click Enter to view the channel.
If you followed the above correctly, you should now get access to the channel.

Da li trebam ubaciti software u Alien?

U Alien se ne mora ubaciti software. 
Po izlasku novog software-a na internet isti će se automatski downloadat na vaš prijemnik (uz vašu potvrdu). 
Nije potreban nikakav Extra software da bi ostvarili dodatne mogućnosti prijemnika. 
Sve dodatne mogućnosti se ostvaruju putem Plugin-ova.


Kako da ručno instaliram Software-a u Alien? (kada prijemnik nije na internetu)

Za najbolje perfomanse vašeg Amiko SHD-8900 Alien prijemnika preporučamo Spark software, osim
Spark-a Alien može raditi i na Enigmi 
2. Software je najlakše ubaciti putem USB-a, kad downloadate software-a isti snimite na USB a zatim USB umentnite u prijemnik. 
Upalite prijemnik pritisnite MENU>SYSTEM>UPGRADE>UPGRADE FROM USB,izaberite App+Database, pod opcijom Folder nađite Software (koji mora biti smješten u Folder npr. Amiko) počnite sa instalacijom pritiskom na CRVENU tipku, po završetku instalacije ići na opciju vrati na tvorničke postavke "Reset to factory default".
Uputu možete pogledati na Youtube servisu. 





Kako da instaliram Plugin?
Snimiti Plugin na USB. 
USB umetnuti u prijemnik, pojavit će se izbornik sa upitom da li želite instalirati Plugin, samo potvrdite i Plugin će se instalirati (Folder Plugin mora biti na root-u USB-a).

Kako da konfiguriram Oscam Plugin i ubacim liniju?
Postoje dvije vrste konfiguracije Oscam Plugina, putem FTP-a ili putem Browsera.
- Konfiguracija putem FTP programa (Total Commander ili FileZilla)
Sa FTP programom ući u datoteku Oscam.server (koja se nalazi u VAR/KEYS), samo upisati liniju, port,
user i pass. Primjer Oscam.servera koji nije konfiguriran...
##########################################################
# All lines preceded by "#" are comment lines so #
# use this model for all your readers ( up to 32 ). #
# A C: line is a CCcam reader , a N: line is NewCamd #
# reader , the internal card readers are also shown. #
# A card reader must always to specify the CAID. #
##########################################################
#
# this is an example of how to connect a CCcam server
# this line acts as a cccam 2.0.11 client ( recomended )
#
# [reader]
#label = cccam_server
#enable = 1
#protocol = cccam
#device = myserver.homelinux.com,12000
#account = username
#password = password
#cccversion = 2.0.11
#cccmaxhops = 2
#group = 1
Primjer konfiguriranog Oscam Servera (obratiti pažnju na # koje se moraju izbrisati)
label = cccam_server #ako unosite 2 ili više linija izmjeniti naziv
enable = 1
protocol = cccam
device = linija,12000 (broj porta)
account = username
password = password
cccversion = 2.0.11
cccmaxhops = 2
group = 1
Sačuvati promjene koje ste izvršili... - Konfiguracija putem Web Browsera (lakše i brže)
Ukucajte IP adresu vašeg prijemnika u web browser staviti dvotočku i upisati 8888
(primjer 192.168.1.100:8888). Ušli ste u Alien zatim ukucajte User alien, Pasword alien,
ići na FILES pa u Oscam.server i ukucajte svoju liniju kao što je prikazano.
##########################################################
# #
# All lines preceded by "#" are comment lines so #
# use this model for all your readers ( up to 32 ). #
# A C: line is a CCcam reader , a N: line is NewCamd #
# reader , the internal card readers are also shown. #
# A card reader must always to specify the CAID. #
# #
##########################################################
#
# this is an example of how to connect a CCcam server
# this line acts as a cccam 2.0.11 client ( recomended )
#
[reader]
label = cccam_server
enable = 1
protocol = cccam
device = naziv linije,port
account = user
password = pasword
cccversion = 2.0.11
cccmaxhops = 3
# dont use higher than 3 !!!
group = 1
inactivitytimeout = 1
reconnecttimeout = 30
Snimiti promjene sa opcijom SAVE u dnu ekrana.
Kako preći sa Spark-a na Enigmu2 ( E2 ) i obrnuto?
Alien pored Sparka ima prostor i za Enigmu2 (istovremeno)...
Prelazak sa Sparka na E2 mod:
OFF prekidačem iza, stisnuti OK, pa ON na prekidaču do poruke FORC, onda stisnuti DOWN, na display-u
će ispisati ENIG, pa OK dok ne počne odbrojavanje na display-u.Sačekati da se podigne E2.
Prelazak sa E2 na Spark:
OFF prekidačem iza, stisnuti OK, pa ON na prekidaču, do poruke FORC, onda stisnuti UP, na display-u će
ispisati SPARK pa OK dok ne počne odbrojavanje na display-u.Sačekati Spark.
Kako instalirati Software Enigma 2 (E2)?
Snimiti Enigmu 2 na USB (folder nazvati enigma2 i mora biti na root-u), na prijemniku prebaciti na mod
Enigma2 (objašnjeno u pitanju kako prebaciti sa Sparka na Enigmu 2). Ugasiti prijemnik, umetnuti USB i
pri paljenju držati gumb OK. Nakon poruke na displeju FORC pritisnuti desno ( > ) i sačekati da se
instalacija završi.